Colt 1851 Navy
Autor:
Rozmiar:
37.24 KB
Przesłano:
Pobrań:
146
Łączna liczba pobrań: 146
Unikalnych pobrań: 129
-
Pobierz (0.04 MB)2 marca 2025colt-1851-navy_1740876862_995267.zip
Colt 1851 Navy to rewolwer z jedną lufą, zapalany kapiszonami, zaprojektowany przez Samuela Colta w latach 1847-1850. Produkcja tej broni rozpoczęła się w 1851 roku i trwała do 1873 roku, stopniowo ustępując miejsca rewolwerom z metalowymi nabojami.
Informacje o modelu:
- Rozmiar modelu to ponad 300 KB.
- Wymiana standardowego rewolweru: colt45.dff (Colt 45).
- Aby zainstalować, musisz przygotować ES File Explorer, TXD TOOL oraz IMG TOOL.
Instalacja:
- Otwieranie plików gry:
- Otwórz ES File Explorer.
- Przejdź do Pamięć wewnętrzna > Android > obb.
- Znajdź folder z ikoną Grand Theft Auto: San Andreas i wejdź do niego.
- Zmień nazwę dwóch szarych plików, dodając ".obb" na końcu.
- Otwórz archiwum i wyodrębnij pliki gta3 (folder) oraz gta3.img (szary plik) z folderu texdb .
- Rozpakuj pliki dff.zip oraz txd.zip, zawierające model i tekstury.
- Wymiana modelu za pomocą IMG TOOL:
- Otwórz IMG TOOL i załaduj gta3.img z folderu texdb .
- Znajdź colt45, usuń go.
- Dodaj rozpakowany plik Colt 1851 Navy (colt45.dff).
- Wymiana tekstur za pomocą TXD TOOL:
- Otwórz TXD TOOL.
- W prawym dolnym rogu wybierz txd w gta3.txt.
- Wybierz colt45.txd i kliknij "Wybierz, aby nadpisać i utworzyć powiązanie".
- Nie klikaj Napraw przypadek.
Gotowe! Twój bohater teraz użyje Colt 1851 Navy w grze zamiast standardowego Colta 45.
Nazwa i opis pliku zostały przetłumaczone Pokaż oryginał
(EN)Pokaż tłumaczenie
(PL)
Colt 1851 Navy
The Colt 1851 Navy is a primer-fired, single-barrel revolver designed by Samuel Colt between 1847 and 1850. Production of this gun began in 1851 and continued until 1873, gradually giving way to revolvers with metal cartridges.
Information about model:
- The model size is over 300 KB.
- Replacement of the standard revolver: colt45.dff (Colt 45).
- For installation you need to prepare ES File Explorer, TXD TOOL and IMG TOOL.
Installation:
- Opening game files:
- Open ES File Explorer.
- Go to Internal Storage > Android > obb.
- Find the folder with the Grand Theft Auto: San Andreas icon and go to it.
- Rename the two gray files, adding ".obb" at the end.
- Open the archive and extract the files gta3 (folder) and gta3.img (gray file) from the texdb folder.
- Unzip the files dff.zip and txd.zip, containing the model and textures.
- Replacing the model via IMG TOOL:
- Open IMG TOOL and load gta3.img from texdb folder .
- Find colt45, delete it.
- Add the unzipped Colt 1851 Navy file (colt45.dff).
- Replace textures via TXD TOOL:
- Open TXD TOOL.
- In the bottom right corner select txd in gta3.txt.
- Select colt45.txd and click "Select to overwrite and create association".
- Do not click Fix Case.
Done! Your character will now use the Colt 1851 Navy in the game instead of the standard Colt 45.
Poradniki dotyczące instalacji modów
Komentarze 1
